Assessing the Feasibility of a Multifaceted Intervention Package for Improving Respiratory Health of Textile Workers: Findings From the MultiTex Pilot Study in Karachi, Pakistan.

We piloted the development and implementation of a multifaceted intervention package for improving respiratory health among textile workers using a pre-post design at six mills in Karachi. The intervention, implemented following a baseline survey (n = 498), included health and safety training of workers and managers, promotion of cotton dust control measures, and the provision of facemasks. Follow-up surveys were conducted at 1, 6, and 12 months post-intervention. Knowledge, attitude, and practice (KAP) scores and respiratory symptoms were assessed through a questionnaire and spirometry was conducted. The intervention was provided to 230 workers and led to an improvement in KAP scores that was more likely among workers with a higher educational status, spinners, smokers, those with a permanent employment status, working in morning shifts, and with ⩾5 years of textile experience. We found the intervention acceptable and feasible in these textile mills henceforth, trials are required to determine its effectiveness.

Use of prototype side stream filtration system to control dust levels in a commercial swine farrowing building.

Swine meat provides an essential global food source. Due to economies of scale, modern U.S. swine production primarily occurs indoors to maintain an optimal environment across the stages of swine production. Indoor concentrations of dust and contaminant gases in swine production buildings increase in the winter months due to reduced ventilation to optimal building temperature. In this study, an engineering control technology designed to recirculate the air in a swine farrowing room through a mobile air handling unit containing high-efficiency particulate filters was presented. A mobile solution could be easily deployed as an intervention method if an infectious disease outbreak occurs at a swine operation. The performance of this control technology was evaluated following deployment in a production farrowing barn for a period of 6 weeks during the winter in the Midwestern United States. Contaminant concentrations of inhalable dust, respirable dust, and carbon dioxide were measured in the room treated by the prototype system and compared to contaminant concentrations measured in an untreated "control" room. Over 6 weeks, the mean inhalable and respirable dust concentrations observed during the study period for the "treatment" room were 2.61 and 0.14 mg/m3, respectively, compared to 3.51 and 0.25 mg/m3, respectively, for the control room. The mobile recirculating ventilation system, operating at a flow rate of 45 m3/min (5 room air exchanges per hour), reduced the inhalable dust by 25% and respirable dust by 48% as measured with a real-time aerosol monitor, when compared to the control room. In addition, no concentration differences in carbon dioxide and relative humidity between the treatment and the control rooms were observed. Inhalable and respirable concentrations of dust were significantly reduced (p = 0.001), which demonstrates an essential improvement of the air quality that may prove beneficial to reduce the burden of disease among both workers and animals.

How to optimize dust pollution control in opencast coal mines: Analysis of a joint social regulation model based on evolutionary game theory.

The carbon peaking and carbon neutrality goals drive innovation in pollution governance systems, unleashing the potential of social supervisory forces to achieve coordinated governance by multiple stakeholders. In order to improve dust pollution control in opencast coal mines, this study combines prospect theory with evolutionary game theory, analyzing the evolutionary game process of coordinated governance activities of coal mining enterprises, local regulators, and social camps in the management of dust pollution against the backdrop of national supervisions. The research indicates that the perceived value of dust pollution has a significant impact on the strategic choices of the three agents involved in the game. Coal mining enterprises tend to be risk averse, and by reducing the cost of dust pollution control and increasing the additional benefits of pollution control, it can promote pollution control behavior by coal mining enterprises. Local regulators are also risk averse, but not sensitive to risk benefits. Strengthening pollution subsidy incentives and environmental fines can help promote dust pollution control behavior by coal mining enterprises. However, increasing the strength of the rewards strategy is not conducive to local regulators' own regulatory responsibilities, and environmental fines have limited binding effects. The strategic choices of social camps' supervision have a restrictive effect on the strategic choices of coal mining enterprises and local regulators, promoting the evolution of equilibrium results in the direction of maximizing social benefits. When coal mining enterprises actively governance pollution, local regulators strictly regulated, and social camps do not monitor, the system reaches its optimal equilibrium state. The research results clarify the mechanism and specific effects of social supervision of opencast coal mine dust pollution control, guide the participation of the public in dust pollution control, and regulate the behavior strategies of coal mining enterprises and local regulators, providing the scientific basis for management.

Experimental study on ratio optimization and application of improved bonded dust suppressant based on wetting effect.

Traditional bonded dust suppressants have high viscosity, insufficient fluidity and poor permeability problems, which is adverse to the formation of a continuous and stable solidified layer of dust suppressant solution on the surface of a dust pile. Gemini surfactant has efficient wetting performance and environmental protection performance, it is introduced as a wetting component to improve the flow and penetration performance of bonded dust suppressant solution, polymer absorbent resin (SAP) and sodium carboxymethyl starch (CMS) were selected as the main components of dust suppressant. A proportioning optimization model was constructed based on response surface methodology (RSM), and the concentration of each dust suppression component was selected as the independent variable, water loss rate, moisture retention rate, wind erosion rate and solution viscosity were chosen as the dependent variables in this model. The optimal formulation of the improved bonded dust suppressant was obtained by analyzing the laboratory experiments and field tests data. The results show that the effective time (≥15d) of the newly developed dust suppressant is 45 times longer than that of pure water (≈1/3d), and 1.875 times longer than that of the comparative dust suppressant (8d), the comprehensive cost is 27.36% lower than that of the similar dust suppressant product for mining enterprises.Implications: This paper presents the research idea of optimizing the bonded dust suppressant based on the improvement of wetting performance. And the paper used response surface method to obtain a wetting and bonding composite dust suppressant formulation. The field test shows that the dust suppressant has good dust suppression performance and economic benefits. This study laid the foundation for the development of new and efficient dust suppressants, and had important theoretical and application values for reducing dust environmental hazards and preventing occupational diseases.

A systematic review of the effectiveness of dust control measures adopted to reduce workplace exposure.

The recent increase in silicosis cases in several countries casts doubt on dust control practices and their effectiveness in preventing respirable crystalline silica (RCS) exposure. Apart from silicosis, RCS may lead to other illnesses, health-related quality of life losses for workers and their families, and economic losses for companies. Thus, this systematic literature review examined the effectiveness of interventions employed to prevent exposure to RCS and increase the use of dust control measures. The review used keywords related to dust control interventions to search seven databases. Search results were screened and extracted for synthesis. The narrative synthesis showed the extent of research investment in China. In several designs and combinations, the interventions utilized water, surfactant, foam, and air currents to reduce dust exposure. These interventions offer varying degrees of dust control effectiveness against RCS and respirable dust. Although evidence indicates that interventions significantly decrease dust concentration levels, the control measures in place may not effectively prevent workplace overexposure to RCS. The review found that education and training interventions are employed to improve dust controls and respiratory protective equipment (RPE) use. Also, marketing strategies promote the use of RPE. These interventions can increase the frequency of use of RPE and the adoption of best practice dust control measures. Interventions increase knowledge, awareness, and attitudes about RPE usage and generate positive perceptions while reducing misconceptions. However, the benefits obtained from an intervention may diminish after its implementation, indicating that the interventions may not continually motivate workers to adopt control measures or use RPE.

Preliminary investigation of a hypertonic saline nasal rinse as a hygienic intervention in dairy workers.

Livestock workers experience an increased burden of bioaerosol-induced respiratory disease including a high prevalence of rhinosinusitis. Dairy operations generate bioaerosols spanning the inhalable size fraction (0-100 µm) containing bacterial constituents such as endotoxin. Particles with an aerodynamic diameter between 10 and 100 µm are known to deposit in the nasopharyngeal region and likely affect the upper respiratory tract. We evaluated the effectiveness of a hypertonic saline nasal lavage in reducing inflammatory responses in dairy workers from a high-volume dairy operation. Inhalable personal breathing zone samples and pre-/post-shift nasal lavage samples from each participant over five consecutive days were collected. The treatment group (n = 5) received hypertonic saline while the control group (n = 5) received normotonic saline. Personal breathing zone samples were analyzed for particulate concentrations and endotoxin using gravimetric and enzymatic methods, respectively. Pro- and anti-inflammatory cytokines (i.e., IL-8, IL-10, and TNF-α) were measured from nasal lavage samples using a multiplex assay. Inhalable dust concentrations ranged from 0.15 to 1.9 mg/m3. Concentrations of both pro- and anti-inflammatory cytokines, specifically IL-6, IL-8, and IL-10, were significantly higher in the treatment group compared to the control group (p < 0.02, p < 0.04, and p < 0.01, respectively). Further analysis of IL-10 anti-inflammatory indicates a positive association between hypertonic saline administration and IL-10 production. This pilot study demonstrates that hypertonic saline nasal lavages were successful in upregulating anti-inflammatory cytokines to support larger interventional studies.

Responses of schoolchildren with asthma to recommendations to reduce desert dust exposure: Results from the LIFE-MEDEA intervention project using wearable technology.

Current public health recommendations for desert dust storms (DDS) events focus on vulnerable population groups, such as children with asthma, and include advice to stay indoors and limit outdoor physical activity. To date, no scientific evidence exists on the efficacy of these recommendations in reducing DDS exposure. We aimed to objectively assess the behavioral responses of children with asthma to recommendations for reduction of DDS exposure. In two heavily affected by DDS Mediterranean regions (Cyprus & Crete, Greece), schoolchildren with asthma (6-11 years) were recruited from primary schools and were randomized to control (business as usual scenario) and intervention groups. All children were equipped with pedometer and GPS sensors embedded in smartwatches for objective real-time data collection from inside and outside their classroom and household settings. Interventions included the timely communication of personal DDS alerts accompanied by exposure reduction recommendations to both the parents and school-teachers of children in the intervention group. A mixed effect model was used to assess changes in daily levels of time spent, and steps performed outside classrooms and households, between non-DDS and DDS days across the study groups. The change in the time spent outside classrooms and homes, between non-DDS and DDS days, was 37.2 min (pvalue = 0.098) in the control group and -62.4 min (pvalue < 0.001) in the intervention group. The difference in the effects between the two groups was statistically significant (interaction pvalue < 0.001). The change in daily steps performed outside classrooms and homes, was -495.1 steps (pvalue = 0.350) in the control group and -1039.5 (pvalue = 0.003) in the intervention group (interaction pvalue = 0.575). The effects on both the time and steps performed outside were more profound during after-school hours. To summarize, among children with asthma, we demonstrated that timely personal DDS alerts and detailed recommendations lead to significant behavioral changes in contrast to the usual public health recommendations.

Evaluation of a self-cleaning portable dust collector for reducing worker exposures to silica at hydraulic-fracturing sites.

National Institute for Occupational Safety and Health (NIOSH) researchers continue to study worker exposure to respirable crystalline silica (RCS) and develop interventions to reduce these exposures. Occupational overexposures to RCS continue to cause illness and deaths in many industries and RCS has been identified as a serious exposure risk associated with hydraulic- fracturing operations during oil and gas extraction. In 2016 the Occupational Safety and Health Administration (OSHA) reduced the permissible exposure limit (PEL) to 0.05 milligrams of silica per cubic meter of air, averaged over an 8-hour day. This mandate requires hydraulic-fracturing operations to implement dust controls and safer work methods to protect workers from silica exposures above this PEL by June 23, 2021. At hydraulic-fracturing sites utilizing sand movers, pneumatic transfer of fracking sand is the primary source of aerosolized RCS. Currently, there are limited commercially available engineering controls for the collection of dust emitted from thief hatches on sand movers. The goal of this research is to develop a robust, cost-effective, weather resistant, portable, self-cleaning dust collection system that can be retrofitted onto sand mover thief hatches. A prototype was designed, built, and tested, and it was determined that the system could handle flows in the range of 600 to 1300 cfm with loading/cleaning cycle times of 40 and 5 minutes respectively and demonstrated operating efficiencies of 97-99%. Further development of this NIOSH prototype is being done in collaboration with an industry partner with the goal of developing a commercially viable, cost-effective solution to reduce RCS at hydraulic-fracturing sites around the world.Implications: This research has verified that airborne dust created by pneumatic transfer of fracking sand can be effectively collected using a passive cartridge filter system, and that the filters can be cleaned using blasts of air. Mounting these units to the thief hatches of sand movers will significantly reduce dust emissions from sand movers on hydraulic fracturing sites. Thus, this system offers the Oil and Gas Industry a method to reduce worker exposure to RCS on hydraulic fracturing sites that utilize sand movers. The success of this prototype has led researchers to devise a modified version for collecting dust at conveyor transfer points.

Improved indoor air quality during desert dust storms: The impact of the MEDEA exposure-reduction strategies.

Desert dust storms (DDS) are natural events that impact not only populations close to the emission sources but also populations many kilometers away. Countries located across the main dust sources, including countries in the Eastern Mediterranean, are highly affected by DDS. In addition, climate change is expanding arid areas exacerbating DDS events. Currently, there are no intervention measures with proven, quantified exposure reduction to desert dust particles. As part of the wider "MEDEA" project, co-funded by LIFE 2016 Programme, we examined the effectiveness of an indoor exposure-reduction intervention (i.e., decrease home ventilation during DDS events and continuous use of air purifier during DDS and non-DDS days) across homes and/or classrooms of schoolchildren with asthma and adults with atrial fibrillation in Cyprus and Crete-Greece. Participants were randomized to a control or intervention groups, including an indoor intervention group with exposure reduction measures and the use of air purifiers. Particle sampling, PM10 and PM2.5, was conducted in participants' homes and/or classrooms, between 2019 and 2022, during DDS-free weeks and during DDS days for as long as the event lasted. In indoor and outdoor PM10 and PM2.5 samples, mass and content in main and trace elements was determined. Indoor PM2.5 and PM10 mass concentrations, adjusting for premise type and dust conditions, were significantly lower in the indoor intervention group compared to the control group (PM2.5-intervention/PM2.5-control = 0.57, 95% CI: 0.47, 0.70; PM10-intervention/PM10-control = 0.59, 95% CI: 0.49, 0.71). In addition, the PM2.5 and PM10 particles of outdoor origin were significantly lower in the intervention vs. the control group (PM2.5 infiltration intervention-to-control ratio: 0.49, 95% CI: 0.42, 0.58; PM10 infiltration intervention-to-control ratio: 0.68, 95% CI: 0.52, 0.89). Our findings suggest that the use of air purifiers alongside decreased ventilation measures is an effective protective measure that reduces significantly indoor exposure to particles during DDS and non-DDS in high-risk population groups.

Toenail Dust as a Potential Occupational Hazard in Podiatric Medicine: A Comprehensive Literature Review.

BACKGROUND: Debridement of toenails is a common procedure that leads to the production of nail dust aerosols in the work environment. Previous studies indicate that inhaled nail dust can cause respiratory distress and eye irritation. This comprehensive review aimed to assess the available literature on the effect of nail dust exposure and to evaluate nail dust as a potential occupational hazard for podiatric physicians. METHODS: A comprehensive literature search was conducted via PubMed, Google Scholar, CINAHL, Cochrane Library, and ClinicalTrials.gov. Risks of bias of the collected studies were evaluated using various assessment tools to match the type of study design. A qualitative analysis of the included studies was performed, from which primary and secondary outcome measures were extracted: prevalence of symptoms and specific microorganisms in nail dust. RESULTS: Of 403 articles screened, eight met the inclusion criteria. The primary outcome measure resulted in a pooled prevalence of eye-related symptoms being the most consistent symptom reported (41%-48%). The secondary outcome measure resulted in a pooled prevalence of Trichophyton rubrum (9.52%-38%) and Aspergillus (11.11%-35.48%) as the most common microorganisms present in nail dust. CONCLUSIONS: From the included eight articles, we found that nail dust is a potential occupational hazard, especially for those exposed more often. Aspergillus and T rubrum are most commonly associated with nail dust leading to development of respiratory illness. It is important to take preventive measures in podiatric medical clinics by using improved and efficient personal protective equipment for workers exposed to nail dust. Detailed health safety guidelines can be developed to decrease respiratory symptoms and diseases from nail dust exposure.

Continuous air purification by aqueous interface filtration and absorption.

The adverse impact of particulate air pollution on human health1,2 has prompted the development of purification systems that filter particulates out of air3-5. To maintain performance, the filter units must inevitably be replaced at some point, which requires maintenance, involves costs and generates solid waste6,7. Here we show that an ion-doped conjugated polymer-coated matrix infiltrated with a selected functional liquid enables efficient, continuous and maintenance-free air purification. As the air to be purified moves through the system in the form of bubbles, the functional fluid provides interfaces for filtration and for removal of particulate matter and pollutant molecules from air. Theoretical modelling and experimental results demonstrate that the system exhibits high efficiency and robustness: its one-time air purification efficiency can reach 99.6%, and its dust-holding capacity can reach 950 g m-2. The system is durable and resistant to fouling and corrosion, and the liquid acting as filter can be reused and adjusted to also enable removal of bacteria or odours. We anticipate that our purification approach will be useful for the development of specialist air purifiers that might prove useful in a settings such as hospitals, factories and mines.

A study protocol to evaluate the impact of a personal and domestic hygiene intervention on lead exposure in a community next to a mine dump.

BACKGROUND: Lead has been associated with adverse health effects, especially neurocognitive and behavioural effects, in children. Communities living close to mining land are at risk of elevated exposure to lead. METHODS: This paper outlines a before and after intervention study protocol to evaluate the impact of a personal and domestic hygiene intervention on lead exposure in a community located adjacent to a mine dump. In each participating household, parents or guardians will be interviewed using a structured questionnaire to obtain information on socio-demographic characteristics, living conditions, domestic hygiene practices and potential alternative sources of exposure to lead. A registered nurse will collect hand wipe samples from children aged one to five years, for whom parental consent and where possible child assent has been obtained. Environmental dust samples will be collected from the floors and/or windowsills of children's dwellings for lead content analysis. Soil samples will be collected from yards to determine lead content. An educational intervention will then be applied to the intervention group, including the engagement of households or guardians in an educational discussion on the sources, pathways of exposure, health effects of lead exposure and protective measures, with the aid of a specially designed educational brochure. Data will be analysed for descriptive and inferential statistics using Stata version 16. DISCUSSION: The study will determine whether the intervention led to a reduction in indoor dust lead levels, and if shown to be effective, will inform the development of an awareness campaign to reduce lead exposure in communities located in close proximity to mine dumps. TRIAL REGISTRATION: The study is retrospectively registered on ClinicalTrials.gov Protocol Registration and Results System with registration number NCT05265572 and first release date of 18th February 2022.

Experimental Study on Dust Suppression Effect and Performance of New Nano-Composite Dust Suppressant.

In this paper, a nano-composite dust suppressant has been proposed to make up for the deficiency in wettability and moisturizing performance of a nanofluid dust suppressant. The nanometer material Al2O3, super absorbent polymer, carboxyl methyl starch sodium, and polyacrylamide were selected as effective components of it. The surface tension of the solution, evaporation resistance, and uniaxial compressive strength (UCS) were chosen as evaluation index to compare the suppression performance, these dust suppressants include the water, nanofluid dust suppressant and nano-composite dust suppressant, and the surface morphology of each tested material was observed by micro image analysis system. It was found that the surface tension and water loss rates of the nano-composite dust suppressants, respectively, decreased by 31.96% and 7.1%, and the maximum UCS increased by 31.82% compared with data of nanofluid dust suppressants. Since the nano-composite dust suppressant has good dispersion, permeability and bond performance, the suppressant film has fewer micro-cracks from the photos of microscopic image; it can improve the compactness and integrity of dust consolidation to prevent the evaporation of water and dust re-entrainment.

Soils' coating helps keep dust storms at bay.

Breakdown of "biocrusts" allows wind to attack dryland soils.

Measurement of the Workplace Protection Factor of Replaceable Particulate and Powered Air-purifying Respirators in Japanese Dust-generating Occupations.

Although measuring the workplace protection factor (WPF) is important to verify the performance of particulate respirators in a real work environment, there are no reports of such measurements in Japan. The aim of this study was to measure the WPF of a replaceable particulate respirator (RPR) and a powered air-purifying respirator (PAPR). Eight participants were subjected to three conditions: wearing a RPR correctly (C-RPR), wearing a RPR as usual (but incorrectly) (U-RPR), and wearing a PAPR in the same way as U-RPR (PAPR). Subjects performed dust-generating tasks for 15 min, during which the WPF was measured. The WPF was calculated by dividing the concentration of particles outside the particulate respirator (Co) by that inside the particulate respirator (Ci). A fit testing instrument was used to measure the number of particles. Ci was measured by inserting the test guide into the face piece, and Co was measured by fixing the test guide near the breathing area of the subjects. The WPF geometric mean values (standard deviations) for C-RPR, U-RPR, and PAPR were 17.7 (2.59), 27.0 (3.86), and 117.3 (5.25), respectively. It is important to generate knowledge about the performance of particulate respirators to prevent occupational respiratory diseases.

Influence of face shields on exposures to respirable aerosol.

The objective of this study was to determine the influence of face shields on the concentration of respirable aerosols in the breathing zone of the wearer. The experimental approach involved the generation of poly-dispersed respirable test dust aerosol in a low-speed wind tunnel over 15 min, with a downstream breathing mannequin. Aerosol concentrations were measured in the breathing zone of the mannequin and at an upstream location using two laser spectrophotometers that measured particle number concentration over the range 0.25-31 µm. Three face shield designs were tested (A, B, and C) and were positioned on the mannequin operated at a high and low breathing rate. Efficiency-the reduction in aerosol concentration in the breathing zone-was calculated as a function of particle size and overall, for each face shield. Face shield A, a bucket hat with flexible shield, had the highest efficiency, approximately 95%, while more traditional face shield designs had efficiency 53-78%, depending on face shield and breathing rate. Efficiency varied by particle size, but the pattern differed among face shield designs. Face shields decreased the concentration of respirable aerosols in the breathing zone when aerosols were carried perpendicular to the face. Additional research is needed to understand the impact of face shield position relative to the source.

Controlling flour dust exposure by an intervention focused on working methods in Finnish bakeries: a case study in two bakeries.

Objectives. The purpose of this study was to examine the effectiveness of intervention strategies to control mass concentrations and peak exposures of flour dust in two Finnish bakeries. The effect of the intervention on the proportion of various particle size fractions of the total particulate matter was also investigated. Methods. Mass concentrations of flour dust were measured during three working days in a pre-intervention and post-intervention study in both an industrial and a traditional bakery. Gravimetric sampling and real-time measurements were performed. Relevant intervention strategies focused on working methods were planned in collaboration with the managers of the bakeries. Results. The average mass concentration of inhalable flour dust reduced in most of the stationary locations post intervention. The reductions in exposure levels were between 39 and 45%. However, the exposure levels increased 28-55% in the breathing zone. Real-time measurements showed reductions in the peak mass concentrations in the traditional bakery post intervention. In both bakeries, the total particulate matter size fraction consisted predominantly of particles with an aerodynamic diameter lower than 1 µm and greater than 10 µm. Conclusion. Further studies are needed to plan more effective intervention measures supplemented by technical control methods in both bakeries.

Markovian city-scale modelling and mitigation of micro-particles from tires.

The recent uptake in popularity in vehicles with zero tailpipe emissions is a welcome development in the fight against traffic induced airborne pollutants. As vehicle fleets become electrified, and tailpipe emissions become less prevalent, non-tailpipe emissions (from tires and brake disks) will become the dominant source of traffic related emissions, and will in all likelihood become a major concern for human health. This trend is likely to be exacerbated by the heavier weight of electric vehicles, their increased power, and their increased torque capabilities, when compared with traditional vehicles. While the problem of emissions from tire wear is well-known, issues around the process of tire abrasion, its impact on the environment, and modelling and mitigation measures, remain relatively unexplored. Work on this topic has proceeded in several discrete directions including: on-vehicle collection methods; vehicle tire-wear abatement algorithms and controlling the ride characteristics of a vehicle, all with a view to abating tire emissions. Additional approaches include access control mechanisms to manage aggregate tire emissions in a geofenced area with other notable work focussing on understanding the particle size distribution of tire generated PM, the degree to which particles become airborne, and the health impacts of tire emissions. While such efforts are already underway, the problem of developing models to predict the aggregate picture of a network of vehicles at the scale of a city, has yet to be considered. Our objective in this paper is to present one such model, built using ideas from Markov chains. Applications of our modelling approach are given toward the end of this note, both to illustrate the utility of the proposed method, and to illustrate its application as part of a method to collect tire dust particles.

Comparing the effectiveness of negative-pressure barrier devices in providing air clearance to prevent aerosol transmission.

PURPOSE: To investigate the effectiveness of aerosol clearance using an aerosol box, aerosol bag, wall suction, and a high-efficiency particulate air (HEPA) filter evacuator to prevent aerosol transmission. METHODS: The flow field was visualized using three protective device settings (an aerosol box, and an aerosol bag with and without sealed working channels) and four suction settings (no suction, wall suction, and a HEPA filter evacuator at flow rates of 415 liters per minute [LPM] and 530 LPM). All 12 subgroups were compared with a no intervention group. The primary outcome, aerosol concentration, was measured at the head, trunk, and foot of a mannequin. RESULTS: The mean aerosol concentration was reduced at the head (p < 0.001) but increased at the feet (p = 0.005) with an aerosol box compared with no intervention. Non-sealed aerosol bags increased exposure at the head and trunk (both, p < 0.001). Sealed aerosol bags reduced aerosol concentration at the head, trunk, and foot of the mannequin (p < 0.001). A sealed aerosol bag alone, with wall suction, or with a HEPA filter evacuator reduced the aerosol concentration at the head by 7.15%, 36.61%, and 84.70%, respectively (99.9% confidence interval [CI]: -4.51-18.81, 27.48-45.73, and 78.99-90.40); trunk by 70.95%, 73.99%, and 91.59%, respectively (99.9% CI: 59.83-82.07, 52.64-95.33, and 87.51-95.66); and feet by 69.16%, 75.57%, and 92.30%, respectively (99.9% CI: 63.18-75.15, 69.76-81.37, and 88.18-96.42), compared with an aerosol box alone. CONCLUSIONS: As aerosols spread, an airtight container with sealed working channels is effective when combined with suction devices.